Table 1 Parameters of basic gears
From: Defect detection of gear parts in virtual manufacturing
Substrate symbol | Tooth number | Modulus (mm) | Tooth width (mm) | The diameter of center hole (mm) |
|---|---|---|---|---|
1 | 18 | 4.00 | 15.00 | 20.00 |
2 | 22 | 2.00 | 8.00 | 15.00 |
3 | 26 | 3.00 | 13.00 | 25.00 |
4 | 30 | 2.50 | 16.00 | 40.00 |
5 | 36 | 2.00 | 17.00 | 20.00 |