Skip to main content
Visual Computing for Industry, Biomedicine, and Art
Visual Computing for Industry, Biomedicine, and Art Cover Image

Articles

Page 4 of 4

  1. Image-based 3D modeling is an effective method for reconstructing large-scale scenes, especially city-level scenarios. In the image-based modeling pipeline, obtaining a watertight mesh model from a noisy multi...

    Authors: Jiali Han and Shuhan Shen
    Citation: Visual Computing for Industry, Biomedicine, and Art 2019 2:10
    Content type: Original Article Published on:

  2. This research addresses the design of intensity-curvature functional (ICF) based digital high pass filter (HPF). ICF is calculated from bivariate cubic B-spline model polynomial function and is called ICF-base...

    Authors: Carlo Ciulla and Grace Agyapong
    Citation: Visual Computing for Industry, Biomedicine, and Art 2019 2:9
    Content type: Original Article Published on:

  3. Specimen observation and dissection have been regarded as the best approach to teach anatomy, but due to the severe lack of anatomical specimens in recent years, the quality of anatomy teaching has been seriou...

    Authors: Xiaoqin Zhang, Jingyi Yang, Na Chen, Shaoxiang Zhang, Yifa Xu and Liwen Tan
    Citation: Visual Computing for Industry, Biomedicine, and Art 2019 2:8
    Content type: Original Article Published on:

  4. With the explosion in the number of digital images taken every day, the demand for more accurate and visually pleasing images is increasing. However, the images captured by modern cameras are inevitably degrad...

    Authors: Linwei Fan, Fan Zhang, Hui Fan and Caiming Zhang
    Citation: Visual Computing for Industry, Biomedicine, and Art 2019 2:7
    Content type: Review Published on:

  5. This paper presents a novel augmented reality (AR)-based neurosurgical training simulator which provides a very natural way for surgeons to learn neurosurgical skills. Surgical simulation with bimanual haptic ...

    Authors: Wei-Xin Si, Xiang-Yun Liao, Yin-Ling Qian, Hai-Tao Sun, Xiang-Dong Chen, Qiong Wang and Pheng Ann Heng
    Citation: Visual Computing for Industry, Biomedicine, and Art 2019 2:6
    Content type: Original Article Published on:

  6. An unmanned aerial vehicle (UAV) is a small, fast aircraft with many useful features. It is widely used in military reconnaissance, aerial photography, searches, and other fields; it also has very good practic...

    Authors: Mengtian Liu, Meng Gai and Shunnan Lai
    Citation: Visual Computing for Industry, Biomedicine, and Art 2019 2:5
    Content type: Original Article Published on:

    The Publisher Correction to this article has been published in Visual Computing for Industry, Biomedicine, and Art 2019 2:11

  7. Industry foundation classes (IFC) is an open and neutral data format specification for building information modeling (BIM) that plays a crucial role in facilitating interoperability. With increases in web-base...

    Authors: Hong-Lei Lu, Jia-Xing Wu, Yu-Shen Liu and Wan-Qi Wang
    Citation: Visual Computing for Industry, Biomedicine, and Art 2019 2:4
    Content type: Original Article Published on:

    The Publisher Correction to this article has been published in Visual Computing for Industry, Biomedicine, and Art 2019 2:11

  8. Traditional 3D printing is based on stereolithography or standard tessellation language models, which contain many redundant data and have low precision. This paper proposes a slicing and support structure gen...

    Authors: Kanle Shi, Conghui Cai, Zijian Wu and Junhai Yong
    Citation: Visual Computing for Industry, Biomedicine, and Art 2019 2:3
    Content type: Original Article Published on:

  9. To overcome the topological constraints of non-uniform rational B-splines, T-splines have been proposed to define the freeform surfaces. The introduction of T-junctions and extraordinary points makes it possib...

    Authors: Wei Wang, Yang Zhang, Xiaoxiao Du and Gang Zhao
    Citation: Visual Computing for Industry, Biomedicine, and Art 2019 2:2
    Content type: Original Article Published on:

  11. Surface-based geometric modeling has many advantages in terms of visualization and traditional subtractive manufacturing using computer-numerical-control cutting-machine tools. However, it is not an ideal solu...

    Authors: Qingde Li, Qingqi Hong, Quan Qi, Xinhui Ma, Xie Han and Jie Tian
    Citation: Visual Computing for Industry, Biomedicine, and Art 2018 1:9
    Content type: Review Published on:

  12. Virtual reality, augmented reality, robotics, and autonomous driving, have recently attracted much attention from both academic and industrial communities, in which image-based camera localization is a key tas...

    Authors: Yihong Wu, Fulin Tang and Heping Li
    Citation: Visual Computing for Industry, Biomedicine, and Art 2018 1:8
    Content type: Review Published on:

  13. With the development of biomolecular modeling and simulation, especially implicit solvent modeling, higher requirements are set for the stability, efficiency and mesh quality of molecular mesh generation softw...

    Authors: Sheng Gui, Dawar Khan, Qin Wang, Dong-Ming Yan and Ben-Zhuo Lu
    Citation: Visual Computing for Industry, Biomedicine, and Art 2018 1:7
    Content type: Review Published on:

  14. Computational aesthetics, which bridges science and art, is emerging as a new interdisciplinary field. This paper concentrates on two main aspects of computational aesthetics: aesthetic measurement and quantif...

    Authors: Yihang Bo, Jinhui Yu and Kang Zhang
    Citation: Visual Computing for Industry, Biomedicine, and Art 2018 1:6
    Content type: Review Published on:

  15. As a matter of fact, most natural structures are complex topology structures with intricate holes or irregular surface morphology. These structures can be used as lightweight infill, porous scaffold, energy ab...

    Authors: Jiawei Feng, Jianzhong Fu, Zhiwei Lin, Ce Shang and Bin Li
    Citation: Visual Computing for Industry, Biomedicine, and Art 2018 1:5
    Content type: Review Published on:

  16. For thin-walled parts, uniform allowance to each machining surface is allocated by the traditional machining method. Considering the sequence of the adjacent machining features, it may cause poor stiffness for...

    Authors: Sen Jiang, Yingguang Li and Changqing Liu
    Citation: Visual Computing for Industry, Biomedicine, and Art 2018 1:4
    Content type: Research Published on:

  17. Simultaneous photoacoustic and ultrasound (PAUS) imaging has attracted increasing attention in biomedical research to probe the optical and mechanical properties of tissue. However, the resolution for majority...

    Authors: Yuqi Tang, Wei Liu, Yang Li, Qifa Zhou and Junjie Yao
    Citation: Visual Computing for Industry, Biomedicine, and Art 2018 1:3
    Content type: Research Published on:

  19. Molecular imaging (MI) is a novel imaging discipline that has been continuously developed in recent years. It combines biochemistry, multimodal imaging, biomathematics, bioinformatics, cell & molecular physiol...

    Authors: Yu An, Kun Wang and Jie Tian
    Citation: Visual Computing for Industry, Biomedicine, and Art 2018 1:1
    Content type: Review Published on:
Submit manuscript

Affiliated with

  • wn_head_06

  • China Graphics Society (CGS) is a national, academic, and non-profit organization. It’s founded in 1980 and is affiliated to China Association for Science and Technology. CGS gathers a large number of renowned experts, scholars and science and technology in realm of graphics, with a membership of over 100,000 people. CGS is one of the initiators of International Society for Geometry and Graphics (ISGG), and is its group member. CGS has actively assigned delegations to attend the international Conference on Geometry and Graphics (ICGG) held by ISGG and successfully hosted ICGG in China for many times.

Annual Journal Metrics

  • Citation Impact 2023
    Journal Impact Factor: 3.2
    5-year Journal Impact Factor: 3.8
    Source Normalized Impact per Paper (SNIP): 1.126
    SCImago Journal Rank (SJR): 0.600

    Speed 2023
    Submission to first editorial decision (median days): 8
    Submission to acceptance (median days): 116

    Usage 2023
    Downloads: 294,735
    Altmetric mentions: 28

The journal is indexed by

  • Emerging Sources Citation Index (ESCI)
  • EI Compendex
  • SCOPUS
  • PubMedCentral
  • DBLP
  • Dimensions
  • DOAJ
  • EBSCO Discovery Service
  • Google Scholar
  • Institute of Scientific and Technical Information of China
  • Naver
  • OCLC WorldCat Discovery Service
  • ProQuest-ExLibris Primo
  • ProQuest-ExLibris Summon
  • ACM Digital Library
  • WTI Frankfurt eG
  • CNKI
  • TD Net Discovery Service
  • ISSN: 2524-4442 (electronic)